Fundamentally, a robot is a programmed machine that performs tasks especially the hard ones instinctively. Robots are usually connected to computers and this is how they receive their instructions. It would not be possible for robots to fully replace human beings however, they can be used to perform tasks in environments that are known to be risky for human beings.
Initially, robots were only used to perform common tasks such as wielding. However over time, they have evolved to perform more complex tasks. Among them, receiving verbal instructions on how to look after a patient, they are used in the locomotive industry among others. The manufacturing industry has also benefitted greatly from the evolution of robots by using them to move heavy loads that would be too difficult for humans. Robots are advantageous because they can survive in environments with extreme temperatures as compared to human beings.
As mentioned earlier, the 21st century robots can do more complex tasks as compared to the first robots to be in existence. But for them to accomplish such tasks, they need to be connected to an end effector. This is a gadget that is installed at the end part of the robotic arm to enable it link up to the natural world. The robot end effector enables the robot to produce thorough results as explained in this article.
The type of instrument attached to the robot as an end effector highly depends on the use for which the robot has been put up to as discussed below.
1. Preparatory work and finalising
The ATI axially-compliant orbital sander is a simple tool that can be attached to robots of different sizes and shapes. It is used in preparing surfaces and also to file, giving them a smooth finish. It is advantageous as it replaces the manual skills thus, reducing the overall surface preparation costs. It also enhances safety.
2. Smooth metal edges
After metal is cut, it needs to be smoothened to avoid causing cuts on the worker. When the metal goes through smoothening, it also reduces the cost of machine maintenance because the metal edges are already even. The best tool for this is the ATI compliant deburring blade.
3. Buffing
Dynabrade robotic sanders are the best for producing a smooth and consistent surface. It works best because, the manual sander might not be effective in giving a flawless surface. This tool is mostly used in the carpentry, metal among other industries.
4. Fluid dispenser
The manufacturing industry uses some fluids that might be harmful to human health after prolonged exposure to them. This is where the fancort dispense comes in handy as it is used to pass out such and other fluids used in the manufacturing processes.
5. Co-worker
We would all appreciate to have a colleague whom we work hand-in-hand with as this will ensure that perfect results are produced in the shortest time possible. A cobot is that co-worker. It is created to team up with a human being, as opposed to a robot which replaces human beings.The ISAND cobot is effective in the filing processes as it reduces the time used to work on a particular surface.
Wrapping-up
The car that was used in the 50’s is not the same car on the roads today. The machine that was used to process food then, is not the same that is in use today. This only means that, the world is evolving at a very high rate. Therefore, industries are engaging in more complex processes. The use of robot end effectors is therefore crucial in the times we are living in as it reduces the overall cost of production and also quickens the processes. Another great advantage is the promotion of good health among workers. This is because, workers will not be involved in some of the dangerous manufacturing processes such as dispensing unsafe fluids.
Leave a Comment